Total 5 vessels under construction at Hudong-Zhonghua Shipbuilding (Group) Co. Ltd. for Atlantic Container Line AB.
The vessel is designed as a modern partly open top RoLo vessel carrying containers and RoRo cargo. The RoRo spaces are arranged generally amidships and container bays are arranged in both ends of the vessel.
The vessel has a transom stern, high efficiency rudder and single screw fixed pitch propeller directly driven by a slow speed diesel engine. The engine room is located aft. There is a pipe duct between the engine room and the bow thruster room. All living quarters, including navigation bridge, are located amidships on top of the RoRo area.
Contract and Basic Design, including:
RINA C+ CONTAINER SHIP, RO-RO CARGO SHIP, AUT-UMS, ICE CLASS IC, STAR-HULL, GREEN PLUS, MON-SHAFT, PMS.
Number of vessels: 5
IMO number (H1695A) 9670573
IMO number (H1696A) 9670585
IMO number (H1697A) 9670597
IMO number (H1698A) 9670602
IMO number (H1699A) 9670614
ACL Announces a New Fleet of Multipurpose RoRo/Containerships
WESTFIELD, NJ – Atlantic Container Line has signed a contract with Hudong-Zhonghua Shipbuilding to build the five largest RoRo/Containerships (ConRos) in the world. The G4 (Generation 4) vessels will replace ACL's existing fleet of G3 ConRos operating in the company's transatlantic service.
The new vessels will be the first of their type ever built. They will be bigger, faster, greener and more efficient than their predecessors. The G4's will have a container capacity of 3800 TEUs plus 28,900 square meters of RoRo space, with a car capacity of 1307 vehicles. Speed will be increased by 10 %, yet fuel consumption per TEU will be reduced by 50 %. The new ships will continue to employ cell-guides on deck, a feature that will allow ACL to extend an enviable record: its ships have never lost a container over the side during the last 30 years. All five vessels will be delivered in 2015.
The innovative design was the brainchild of International Maritime Advisors (IMA) of Dragoer, Denmark, who successfully solved the problem of high ballast on ConRo vessels.
Virtually all ConRo vessels today stow containers on deck and lighter RoRo cargo underdeck. Because of the significant air space that naturally occurs on RoRo decks compared to the denser stowage of containers, most of the weight rides high on a standard ConRo vessel, requiring a great deal of ballast for stability. IMA developed the concept of putting all the RoRo cargo amidships, and stowing the containers in cells fore and aft of the RoRo section. This results in cargo replacing ballast and much more efficient use of vessel space.
HUDONG-ZHONGHUA SHIPBUILDING (GROUP) CO.,LTD.
Hudong-Zhonghua Shipbuilding (Group) Co., Ltd. is a large shipbuilding enterprise under the leadership of China Shipbuilding Group Corporation (CSSC). The Group is founded through merger between Hudong Shipbuilding Group and Zhonghua shipyard. The head office of the group is located at Pudong New Area, with major production areas at the eastern part of Shanghai, along both sides of the Huangpu River.
They have built over 3,000 ships, including complicated special purpose vessels and naval vessels. HZ commissioned KNUD E. HANSEN A/S of Helsingor, Denmark, to adapt the IMA ConRo concept to ACL’s requirements.
ATLANTIC CONTAINER LINE